Mount these end pivots on both ends of your DIY linear actuators in place of U-joints that are designed to transmit torque. Perfect for your linear hexapod (Stewart platform) motion simulator project. Rated for 4500N/1000LBF dynamic load. M8 screws and T-nuts are included to mount directly to 40 series and 15 series T-Slot extrusion or any custom made brackets. The 20mm rod end, coupled with stainless steel misalignment spacers allow for 80deg x 210deg of angular travel. Two pivots are needed per linear hexapod actuator. Compatible with our DIY linear actuator design.
Made in China
What's Included:
| Part | Quantity |
| M20x1.5 Male Rod End | 1 |
| M20x1.5 Jam Nut | 1 |
| Misalignment Spacer | 2 |
| Steel U-Bracket | 1 |
| M8 Cap Screw, 100mm | 1 |
| M8 Washer | 6 |
| M8 Locknut | 1 |
| M8 Cap Screw, 18mm | 4 |
| M8 T-Nut | 4 |
Mounting Orientations
The hole pattern on the 6mm steel brackets allow the pivots to be mounted in T-slot extrusion in 30 degree increments.
Mechanical Drawing
Note: All dimensions in millimeters (mm)
Customer Reviews
Based on 2 reviews
Write a review